Vertical Bias Cutter Kits

Phone: 203-877-1041
Fax: 203-877-1173

Update Kits for your 64" and Model 100 Bias Cutters

The venerable 64" Vertical Bias Cutter has remained a fixture in many plants around the world. Spadone offers several simple conversions that improve performance and reduce maintenance, as well as machine add-ons that will improve productivity and efficiency. While most of these are applicable to the old 64" models, the servo conversions have been successfully implemented on the Model 100. Call us with the serial number of the machine to see if your Spadone Bias Cutter can benefit from the upgrade kits listed below.

Kit-Bias1 Complete Feed Roll Kit

Eliminates the ratchet assembly with an electric clutch and brake.

Kit-Bias2 Air Operated Fabric Clamp

A better way to activate the fabric clamp. A change of air pressure will adjust for exactly the correct fabric clamping pressure. Difficult adjustments at the end of the clamp are no longer necessary.

Kit-Bias3 Bias Angle Raceway Clamp

Simplify changing the bias angle. A movement of the manual air valve frees the raceway for change of angle.

50-1010C Aluminum Clamp Bar

Stop damaging the surface of the raceway.

50-1967D Warner Electric Clutch and Brake

Replace the JW8 mechanical clutch.

50-1976D.1-22 Anti-Friction Bearings and Bearing Supports

Replace the "homemade" Babbit Bearings in the Main Drive.

Kit-Bias4 Servo Feed Roll Conversion

Use servo technology to enhance cut accuracy. This kit replaces the old electro-mechanical fabric feed mechanism with a direct servo drive to the feed roll .

Add-On Machinery

50-1876D Air Scoop Splice Table

The work station to facilitate ply handling and splicing.

63-301D Automatic Precision Dual Windup

Install in existing lines for precise fabric rolls and high productivity.

63-1451D Single Station Surface Windup

A less expensive alternative to the Dual Windup.